S5200 Offset Blanket
s5200 (Espanol)


S5200 Offset Blanket

Hard type compressible blanket for sheetfed,
packaging and metal decorating printing. This closed cell compressible blanket is ideally suited for carton printing, metal decoration and general printing. The S5200 offers good cost performance, excellent solid coverage, and quick release.

Advantages
  • High strength fabrics reduce stretching and associated gauge loss.
  • Strict gauge control from blanket to blanket ensures quicker setup, less paper loss and perfect dot reproduction every time.
  • Surface rubber is formulated to give quick release.
  • Specially designed carcass with minimal gauge loss.
  • Coating techniques require less solvent use in the rubber. This results in pinhole-free surfaces.
  • Abrasive resistant surface eliminates edge cutting when used for metal deco printing.
  • Surface profiled to give excellent ink coverage on solids while maintaining quick release.
  • Improved compressible layer eliminates solvent wicking.
Typical Physical Properties


  2 ply 3 ply 4 ply Ryobi
Overall Hardness (Shore A) 79 – 83 79 – 83 79 – 83 73-77
Gauge 1.30 mm –
1.38 mm
1.65mm –
1.70 mm
1.90 mm –
1.95 mm
2.56 mm –
2.61 mm
(% at 8.9 kgf/cm)
(% at 8.8 kN/m)
Elongation
< 1.3 < 1.2 < 1.0 < 1.0
Tensile Strength
40 kgf/cm
39 kN/m
60 kgf/cm
59 kN/m
75 kgf/cm
74 kN/m
90 kgf/cm
88 kN/m
Surface Roughness (Ra) 1.1µm 1.1µm 1.1µm 1.1µm

 


company profile | contact info | locations | technical support
human resources | feedback forms | homepage


© kinyova 2006